Professional strength formula is concentrated for a thorough clean. Formulated for use on all types of hardwood floors that have a clear, unwaxed finish. Professional cleaner leaves no residue and will not dull the floor's finish. pH neutral cleanser is nonflammable. Non-toxic. Application: Floor Cleaner/Degreaser; Applicable Material: Sealed Hardwood Floors; Chemical Compound: Dowanol DPM; Dirt Types: Competitor Cleaners; Dirt; Dust; Grime; Residue; Scum; Water Spots.
Professional strength, waterborne cleaner is formulated for all types of stone, tile, and laminate floors. Dries fast and leaves no dulling residue. Great for spot cleaning of food spills and other stains. Provides a thorough clean, with no oily residue. Leaves behind a fresh, clean scent. pH neutral cleanser is nonflammable. Ready to use cleanser, simply spray and mop. Application: Floor Cleaner/Degreaser; Applicable Material: Laminate; Sealed Stone; Tile; Chemical Compound: Dowanol DPM; Dirt Types: Competitor Cleaners; Dirt; Dust; Grime; Residue; Scum; Water Spots.
A professional strength, non-toxic waterborne cleaner is an excellent choice for everyday cleaning of hardwood floors. Safe for use on all unwaxed, polyurethane finished hardwood floors. Dries fast and leaves no dulling residue. pH neutral cleanser is nonflammable. Ready to use cleanser, simply spray and mop. Application: Floor Cleaner/Degreaser; Applicable Material: Sealed Hardwood Floors; Chemical Compound: Dowanol DPM; Dirt Types: Competitor Cleaners; Dirt; Dust; Grime; Residue; Scum; Water Spots.
Simply drop two pre-measured yellow Carpet Pre-Spotter PAK-It®s into its matching yellow quart trigger spray bottle (sold separately) and add cold, tepid or warm water. Wait two minutes and shake. Adjust nozzle to mist or stream settings and spray liberally onto stain. Allow the product to sit on the stain for one to two minutes to absorb the stain. Rub gently with a hand brush then blot with paper towel or cloth. Repeat if necessary until stain is removed. Finally rinse with a little clean water and blot dry. If using a carpet steamer or extractor, spray on stain before use. Note always test for colorfastness on an inconspicuous surface area. Note: This is the only PAK-IT® Quart Bottle product that requires 2 PAK-It®s not 1. 100 PAK-It®s per Tub, 4 Tubs per Carton. Application: Carpet/Upholstery Spot/Stain Remover; Applicable Material: Natural Textiles; Synthetic Textiles; Carpet; Upholstery; Dirt Types: Food Debris; Grease; Grime; Organic Matter; Spills; Water-Based Soil; Scent: Citrus.
Untouchable with Scuff Resistant Technology (SRT) is a low odor, black heel mark resistant floor finish. An exceptional choice for those who want the highest gloss and wear with the least amount of labor. Untouchable with SRT is nonscuffing, durable, and detergent resistant. It maintains its high gloss with minimal burnishing, saving labor costs. Excellent leveling and low odor make it easy to apply. Application: Floor Finish; Applicable Material: Resilient Tile; Sealed Hard Surfaces; Chemical Compound: Acrylic Polymer; Scent: Mild.
GymShoe® is an exceptionally durable sport floor finish that keeps floors looking better longer. Enjoy enhanced traction as slip-resistance meets or exceeds the minimum requirements. This clear, water-based finish allows for easy clean-up. It is perfect for large sport complexes, higher education, dance floors, retail and commercial space, or any high-traffic sports facilities. With superior two-component performance you can be confident that GymShoe® will hold up to even the busiest of gyms. Application: Floor Finish; Applicable Material: Wood; Chemical Compound: Acrylic Polymer; Urethane Polymer; Scent: Mild.
Squeaky™ is tough on dirt and gentle on wood and gym floors. Squeaky™ leaves no residue. It will not haze sport finishes. Safe to use as a daily cleaner. Squeaky™ is the final cleaning step in the TyKote System. Application: Floor Finish; Applicable Material: Wood Floors; Chemical Compound: Methoxyisopropanolsolvent; Isopropanol; Dirt Types: Soils.
Emulsion® PRO+ is a one-component, commercial grade, self-leveling sealer and finish. This product contains an oxidative, crosslinking polyurethane (OCP). Ideal for use in residential, commercial, or sport wood flooring applications. Ambering quality, enhances the beauty of wood. This product also contains contains a low amount of volatile solvents, which allows it to be Low-VOC. The low-odor formulation is also non-flammable. Application: Floor Finish; Applicable Material: Wood; Chemical Compound: Urethane Polymer; Scent: Mild.
Emulsion® PRO+ is a one-component, commercial grade, self-leveling sealer and finish. This product contains an oxidative, crosslinking polyurethane (OCP). Ideal for use in residential, commercial, or sport wood flooring applications. Ambering quality, enhances the beauty of wood. This product also contains contains a low amount of volatile solvents, which allows it to be Low-VOC. The low-odor formulation is also non-flammable. Application: Floor Finish; Applicable Material: Wood; Chemical Compound: Urethane Polymer; Scent: Mild.
This floor finish delivers both optimal value and performance and is developed specifically for facilities that desire to contain floor maintenance costs. Education and retail facilities will realize savings to their bottom line, while also meeting bid specifications. This formula is designed for low maintenance programs where burnishing is minimal or unavailable. Great off the mop gloss, quick build, and superior leveling make this floor finish easy to apply. Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces. Application: Floor Finish; Applicable Material: Resilient Tile; Sealed Hard Surfaces; Chemical Compound: Ethoxydiglycol; Dipropylene Glycol Methyl Ether; Scent: Mild.
This floor finish delivers both optimal value and performance and is developed specifically for facilities that desire to contain floor maintenance costs. Education and retail facilities will realize savings to their bottom line, while also meeting bid specifications. This formula is designed for low maintenance programs where burnishing is minimal or unavailable. Great off the mop gloss, quick build, and superior leveling make this floor finish easy to apply. Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces. Application: Floor Protectant; Applicable Material: Resilient Tile Flooring; Chemical Compound: Tributoxyethyl Phosphate; Scent: Mild.
A revolutionary new polymer system formulated with XBF technology that provides the longest lasting finish ever. This self sealing extended wear formula retains film integrity and outstanding gloss even after repeated detergent mopping and burnishing. This finish effectively reduces maintenance and prolongs the time between strippings. Specifically formulated for medium maintenance programs, this product will retain its gloss between burnishings. In high speed programs it greatly reduces the need to frequently use a restorer. Application: Floor Finish; Applicable Material: Resilient Tile; Sealed Hard Surfaces; Chemical Compound: Acrylic Polymer; Scent: Mild.
Betco Hard As Nails floor finish utilizes highly durable, internally cross-linked polymers blended to achieve a harder floor finish film. This unique chemistry results in a high-gloss, long-wearing finish that cures fast and hard, resists dirt embedment and scuffs. The perfect labor saving advantage for educational and retail facilities which have little or no time for floor burnishing. Application: Floor Finish/Sealant; Applicable Material: Sealed Marble; Sealed Terrazzo; Vinyl Composition; Vinyl; Linoleum; Chemical Compound: Acrylic Polymer; Scent: Mild.
Betco Hard As Nails floor finish utilizes highly durable, internally cross-linked polymers blended to achieve a harder floor finish film. This unique chemistry results in a high-gloss, long-wearing finish that cures fast and hard, resists dirt embedment and scuffs. The perfect labor saving advantage for educational and retail facilities which have little or no time for floor burnishing. Application: Floor Finish; Applicable Material: Resilient Tile; Sealed Hard Surfaces; Chemical Compound: Acrylic Polymer; Scent: Mild.
Using this cleaner/restorer as a regular part of high-speed floor maintenance program will reduce labor costs and extend the life of the floor. This formulation effectively cleans the floor while restoring the top layer of finish. This product can be mopped on or used through an automatic scrubber before burnishing. One step product: reduces the labor cost and need to recoat. Restore your floor to a beautiful shine! Application: Floor Cleaner/Restorer; Applicable Material: Resilient Tile; Chemical Compound: Ethylene Glycolsolvent; Propylene Glycol; Dirt Types: Scratches; Scuffs.
This water-based urethane sealer and finish revolutionizes the way hard surface floors are sealed. It can be applied effortlessly over new and old hard surface floors. It is resistant to a variety of chemicals. Ease of maintenance is exceptional and requires no etching before application. Recommended for use on all types of stone flooring (brick, marble, slate, terrazzo and concrete-new and old, resilient tile, quarry and non-glazed ceramic tile). Application: Floor Finish; Applicable Material: Concrete, Slate, Quarry, Tile, Terrazo, Marble; Chemical Compound: Acrylic Polymer; Scent: Mild.
This spray buffing compound combines detergents, thermoplastics and solvent for the answer to terrific looking floors. Simply spray on floors and polish with a spray buff pad to easily remove black heel marks, scuffs and scratches leaving a wet look gloss. Regular use of this spray buff will allow the user to reduce stripping and rewaxing procedures by over 75%. Spray buff leaves floor finish very hard and durable yet slip resistant. Application: Floor Finish; Applicable Material: Hard Surfaces; Chemical Compound: Ethylene Glycol; Dirt Types: Scuffs.
Untouchable with Scuff Resistant Technology (SRT) is a low odor, black heel mark resistant floor finish. An exceptional choice for those who want the highest gloss and wear with the least amount of labor. Untouchable with SRT is nonscuffing, durable, and detergent resistant. It maintains its high gloss with minimal burnishing, saving labor costs. Excellent leveling and low odor make it easy to apply. Application: Floor Finish; Applicable Material: Resilient Tile; Sealed Hard Surfaces; Chemical Compound: Acrylic Polymer; Scent: Mild.
Neutral pH all-purpose cleaner for floors, tile and more. Recommended for maintaining finish on floors. When used as directed, it will thoroughly wet, emulsify and suspend soil from floor surfaces without attacking the finish of the floor. For use with Betco®'s FastDraw dilution control system. Application: Floor Cleaner/Degreaser; Applicable Material: Floors; Scent: Unscented; Physical Form: Liquid.
Neutral pH all-purpose cleaner for floors, tile and more. Recommended for maintaining finish on floors. When used as directed, it will thoroughly wet, emulsify and suspend soil from floor surfaces without attacking the finish of the floor. For use with Betco®'s FastDraw dilution control system. Application: Floor Cleaner/Degreaser; Applicable Material: Hard Floors; Chemical Compound: C9-11 Alcohols Ethoxylated; Dirt Types: Dirt; Grime; Oil.
Formulated with neutralizing agents and surfactants to both penetrate and clean tough soils and neutralize common ice melt ingredients, such as sodium and magnesium chloride. Ideal for conditioning floors after stripping and before coating. No need for a two-step process, neutralize and clean in one simple step. This amazing product leaves practically no residue. Application: Floor Neutralizer/Cleaner; Applicable Material: Hard Floor Surfaces; Chemical Compound: Phosphoric Acid; Dirt Types: Ice Melt; Soil.
This powerful blend of low foaming detergents is specifically designed for steam or hot water extraction carpet cleaning by quickly cutting through soil and grease to brighten carpet fibers instantly. Its special blend of surfactants rinses easily and leaves no residue which can lead to premature resoiling. It contains the patented deodorizing power of O3Z malodor counteractant to eliminate odors at their source. This product is not for use on stain resistant carpets. Application: Carpet Cleaner; Applicable Material: Carpet; Fabric; Upholstery; Chemical Compound: Sodium Caprylyl Sulfonatesurfactant; Tetrasodium EDTA; Dirt Types: Dirt; Grease; Oils; Soil.
This easy to use all purpose carpet spotter combines detergent and deodorant technology to remove the most stubborn spots and stains. It effectively removes spots caused from a variety of oil and water-based stains. In health care settings, it is an effective spotter to use on betadine and iodine stains. Recommended for use on all types of carpet, fabric and upholstery. Application: Carpet Cleaner; Applicable Material: Carpet; Fabric; Upholstery; Chemical Compound: Sodium Thiosulfate Anhydrous; Dirt Types: Spotting; Stains.
This specially balanced blend of low foaming surfactants is designed for extraction on all types of carpet and upholstery including stain- resistant. This ultra low residue formula rinses easily and completely and contains built-in O3Z malodor counteractants to help eliminate odors at their source. Application: Carpet Cleaner; Applicable Material: Carpet; Upholstery; Chemical Compound: Sodium Caprylyl Sulfonate; Dirt Types: Odor; Soils.
Surface soils on carpet are unsightly and can lead to permanent damage. Bonnet cleaning provides an advantage with rapid dry time. This formulation dries in less than one hour, is nonflammable, evaporates fast, and cleans a wide variety of soils while leaving no residue. Application: Carpet Cleaner; Applicable Material: Carpet; Fabric; Upholstery; Chemical Compound: 2-butoxyethanol; Dirt Types: Dirt; Soils; Stains.
This highly concentrated product quickly penetrates and knocks down foam to eliminate problems associated with recovery tank foaming. Recommended for use in recovery tanks of extraction machines or automatic scrubbers where foaming might be a problem. Shake or mix container well before using. Breaks foam on contact and eliminates downtime and wasted effort in dumping recovery tanks. This product can be used anywhere foaming is a problem. Application: Equipment; Applicable Material: Autoscrubber Tank; Chemical Compound: Polydimethylsiloxane; Dirt Types: Foam.
A multi-purpose, germicidal detergent and deodorant that disinfects, cleans and deodorizes in one labor-saving step. Recommended for use in hospitals, nursing homes, schools/colleges, commercial and industrial institutions. Neutral pH formula is perfect for damp mopping highly polished floors and will never dull, haze or leave a film. Application: Floor Cleaner; Applicable Material: Hard Floor Surfaces; Chemical Compound: Didecyldimethylammonium Chloride; Dirt Types: Dirt; Grime; Oil.
This powerful blend of low foaming detergents is specifically designed for steam or hot water extraction carpet cleaning by quickly cutting through soil and grease to brighten carpet fibers instantly. Its special blend of surfactants rinses easily and leaves no residue which can lead to premature resoiling. It contains the patented deodorizing power of O3Z malodor counteractant to eliminate odors at their source. This product is not for use on stain resistant carpets. Application: Carpet Cleaner; Applicable Material: Carpet; Fabric; Upholstery; Chemical Compound: Sodium Caprylyl Sulfonatesurfactant; Tetrasodium EDTA; Dirt Types: Soil; Grease; Dirt; Oils.
Green Earth BioActive Solutions™ No-Rinse Floor Cleaner is uniquely formulated with detergents, emulsifiers, builders, and proprietary BioActive non-pathogenic bacteria. This combination digests complex proteins, starch, and fat found in foodservice and other applications. Saves on labor as it eliminates the need to rinse. The non-pathogenic bacteria continue working even after the floor is dry. With regular use it improves traction resulting in a cleaner, safer work environment. Application: Floor Cleaner; Applicable Material: Hard Floor Surfaces; Chemical Compound: Alkyl Polyglycoside; Dirt Types: Dirt; Oil; Grime.
Green Earth BioActive Solutions™ No-Rinse Floor Cleaner is uniquely formulated with detergents, emulsifiers, builders, and proprietary BioActive non-pathogenic bacteria. This combination digests complex proteins, starch, and fat found in foodservice and other applications. Saves on labor as it eliminates the need to rinse. The non-pathogenic bacteria continue working even after the floor is dry. With regular use it improves traction resulting in a cleaner, safer work environment. Application: Floor Cleaner; Applicable Material: Hard Flooring; Chemical Compound: Alkyl Polyglycoside; Dirt Types: Fats; Proteins; Starches.
Designed for floors which are frequently burnished, this product will quickly and completely remove deeply embedded soils. Controlled foam is great for use with a mop and bucket or automatic scrubber. Excellent for scrub and recoat programs at stronger dilutions. Economical, dilute up to 1:1024 for daily cleaning. Application: Floor Cleaner; Applicable Material: Burnished Flooring; Chemical Compound: Ethanolamine; Dirt Types: Dirt; Grime; Oil; Soil.
This high-power, high-speed floor stripper was developed to penetrate and remove multiple coats of burnished floor finish with a minimum amount of labor. Utilizing the latest in technology, this powerful professional stripper unlocks the chemical bonds of acrylic- and urethane-fortified floor finishes releasing them from the floor surface and is suitable for use on most surfaces. Recommended for removing multiple coats of water-based acrylic and urethane-fortified floor finishes from all types of resilient tile and hard surfaces. Not recommended for use on linoleum or sheet vinyl floors. Rinse-free formula has a lower pH than competitive formulas and requires no neutralization or rinsing. Application: Floor Stripper; Applicable Material: Resilient Tile; Sealed Hard Surfaces; Chemical Compound: Butoxyethanol; Ethanolamine; Benzyl Alcohol; Dirt Types: Finish Buildup.
Designed for floors which are frequently burnished, this product will quickly and completely remove deeply embedded soils. Controlled foam is great for use with a mop and bucket or automatic scrubber. Excellent for scrub and recoat programs at stronger dilutions. Economical, dilute up to 1:1024 for daily cleaning. One Quart Bottle—Makes up to 256 gallons. Application: Floor Cleaner; Applicable Material: Burnished Flooring; Chemical Compound: Ethanolaminealkaline; Butoxyethanolsolvent; C9-11 Alcohols Ethoxylatedsurfactant; Ammonium Hydroxide; Dirt Types: Bacteria; Germs; Soils.
When used as directed, it will thoroughly wet, emulsify and suspend soil from highly polished floor surfaces without attacking the gloss of the floor. Guaranteed to never dull, haze or leave a film. Low foam is perfect for automatic scrubber applications. Application: Floor Cleaner; Applicable Material: Hard Floor Surfaces; Chemical Compound: Isopropyl Alcohol; Dirt Types: Dirt; Grime; Soil.
This high-power, high-speed floor stripper was developed to penetrate and remove multiple coats of burnished floor finish with a minimum amount of labor. Utilizing the latest in technology, this powerful professional stripper unlocks the chemical bonds of acrylic- and urethane-fortified floor finishes releasing them from the floor surface and is suitable for use on most surfaces. Recommended for removing multiple coats of water-based acrylic and urethane-fortified floor finishes from all types of resilient tile and hard surfaces. Not recommended for use on linoleum or sheet vinyl floors. Rinse-free formula has a lower pH than competitive formulas and requires no neutralization or rinsing. Application: Floor Stripper; Applicable Material: Resilient Tile; Sealed Hard Surfaces; Chemical Compound: Butoxyethanol; Ethanolamine; Benzyl Alcohol; Dirt Types: Finish Buildup.
This high-power, high-speed floor stripper was developed to penetrate and remove multiple coats of burnished floor finish with a minimum amount of labor. Utilizing the latest in technology, this powerful professional stripper unlocks the chemical bonds of acrylic- and urethane-fortified floor finishes releasing them from the floor surface and is suitable for use on most surfaces. Recommended for removing multiple coats of water-based acrylic and urethane-fortified floor finishes from all types of resilient tile and hard surfaces. Not recommended for use on linoleum or sheet vinyl floors. Rinse-free formula has a lower pH than competitive formulas and requires no neutralization or rinsing. Application: Floor Stripper; Applicable Material: Hard Surfaces; Resilient Flooring; Chemical Compound: Butoxyethanol; Dirt Types: Floor Finish.
