Safety Wear

This lightweight, insulated CAT 3 AR/FR bomber-style jacket is ANSI 107-2010 Class 3 Level 2 compliant and ANSI 107-2015 Type R Class 3 compliant to keep you safe and seen in the field.

This seam-sealed parka locks out moisture while helping ensure your safety. | ANSI/ISEA 107 Class 3 certified 100% polyester shell and lining 8000MM fabric waterproof rating Fully waterproof and seam-sealed Two-way Vislon zipper Hideaway hood Storm flap with snap closure 2-in. wide reflective taping on front, back and sleeves Half-elastic adjustable tab cuffs with hook and loop closures Interior pocket with hook and loop closure Two large lower pockets Drawcord waist and hem with toggle adjustability This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

Stay safer in inclement weather in this high-visibility windbreaker. | ANSI/ISEA 107 Class 3 certified Water resistant 100% PU shell, 100% polyester backing 8000MM fabric waterproof rating Snap-off hood with drawcord and toggle for adjustability Two-way black Vislon zipper Internal storm flap Half-elastic adjustable tab cuffs with hook and loop closures 2-in. wide reflective taping on front, back and sleeves Two welt pockets Drawcord hem with toggle adjustability This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards The hood must be detached and stowed when not in use to be in compliance with ANSI/ISEA 107 standards

100% polyester 300-denier ripstop shell with durable water-repellent (DWR) finish 100% polyester lining Black bottom front and lower sleeves for a cleaner appearance Shell's fabric waterproof rating: 5000MM Fully seam-sealed shell Adjustable rain hood Durable, reflective 2-inch tape meets ANSI 107 requirements Full-length interior and exterior storm flaps Vented cape back Right chest pocket and retractable ID holder Two lower front pockets Center front zippered pocket to hold a tablet Gusseted cuffs Elastic hem Port Pocket ™ in shell for easy embroidery access Non-ANSI, 8.6-ounce, 100% polyester inner full-zip hoodie Hoodie can be attached inside shell This garment must be fully zipped to be in compliance with ANSI 107 standards

This warm performance soft shell combines superior weather protection with the highest class of visibility. 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant, breathable film insert and a 100% polyester microfleece lining Black bottom front and lower sleeves for a cleaner appearance Fabric waterproof rating: 5000MM Fabric breathability rating: 5000G/M2 Full-length interior storm flap with chin guard Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric Molded right chest, hand and center front zippers with rubber pulls Mic clips at shoulders Elastic cuffs with adjustable hook and loop closures and rubber tabs Adjustable drawcord hem This garment must be fully zipped to be in compliance with ANSI 107 standards

This heavyweight CAT 3 AR/FR brown duck jacket is designed with special features to keep you warm and safe in the field, like water-repellent fabric that keeps you dry in wet weather and a three-piece hood for extra warmth when you need it.

This lightweight, insulated CAT 3 bomber-style jacket is ANSI/ISEA 107 Type R Class 3 Compliant. Features separating, heavy-duty Nomex® taped brass zipper, fully covered with updated collar and storm flap construction. Updated cuff. Utility loop at shoulder. Two external patch pockets, with concealed snap secured flaps with hand warmers. Inside chest pocket. Deep-pleated action back. Elasticized waistband. 360° visibility with front and back 2" silver reflective striping. DWR (Durable Water Repellent) finish. Inside zipper guards on all zippers. Accommodates snap-on hood HMH2HVB and liners LNL8 and LNS8, sold separately.

It's everything you want in your PPE. This heavyweight CAT 3 AR/FR brown duck bomber-style jacket is lined to keep you warm and safe out in the field. Plus, innovative features add comfort and convenience and increase mobility.

This heavyweight CAT 3 AR/FR bomber-style jacket is insulated to keep you warm and safe in the field. Water-repellent fabric helps you stay dry, and innovative features like the elasticized waistband and deep-pleated action back increase comfort and mobility.

This women's heavyweight CAT 3 AR/FR parka is insulated to provide warmth and FR protection without excess weight. Plus, water-repellent fabric keeps you dry in wet weather, while elastic inserts at waist across back allow for greater mobility.

Built for warmth and high visibility, this parka can be worn over our Down Jacket (J323, sold separately) for increased weather protection. | ANSI/ISEA 107 Class 3 certified 100% polyester shell, 100% polyester quilted lining 6-ounce polyfill-lined body, 4-ounce polyfill-lined sleeves 8000MM fabric waterproof rating Fully seam-sealed for additional waterproof protection Snap-off adjustable hood Drawcord waist with toggles Storm flap 2-in. wide reflective taping on front, back and sleeves Two-way zipper Waterproof zippered pockets Hand warmer pocket Bellow pockets Molded adjustable tab cuffs with hook and loop closures Interior MP3 player pocket Port Pocket™ for easy embroidery access This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

This lightweight CAT 3 AR/FR bomber jacket is lined and trimmed with 2" reflective tape to keep you warm and safe out in the field. Water-repellent fabric keeps you dry in wet weather.

This lightweight CAT 3 AR/FR bomber-style jacket is fully lined to keep you warm and safe in the field. Water-repellent fabric helps you stay dry, and innovative features like the elasticized waistband and deep-pleated action back increase comfort and mobility.

This lightweight bomber jacket is lined and trimmed with 2" reflective tape to keep you warm and safe out in the field. Water-repellent fabric keeps you dry in wet weather and innovative features like the angled storm flap, sleeve pocket, utility loops at shoulder, elasticized waistband and deep-pleated action back increase comfort and functionality.

This lightweight CAT 3 AR/FR jacket liner snaps into JLB8, JLJ8, JMJ4 and JNJ8 jackets (sold separately), for an added layer of warmth and FR protection, only when you need it.

Our popular jacket in safety colors for enhanced visibility. | Durable 100% polyester water resistant shell Poly-filled body with heavyweight fleece lining for extra warmth 2-in. reflective taping on front, back and sleeves Nylon sleeve lining for easy on/off Rib knit cuffs and waistband Slash zippered pockets, interior zippered pocket Port Pockets™ for easy embroidery access Non-ANSI

100% polyester woven 300-denier oxford shell with durable water-repellent (DWR) finish 5.2-ounce, 100% polyfill insulation, box diamond quilted body and sleeve lining Black bottom front and lower sleeves for a cleaner appearance Fabric waterproof rating: 5000MM Fully seam-sealed Adjustable, zip-removable rain hood with hook and loop closure and toggles Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility Full-length exterior storm flap Left chest bellows pocket Two open lower front pockets Molded center front zippered closure Elastic cuffs Elastic hem Port Pocket ™ for easy embroidery access This garment must be fully zipped to be in compliance with ANSI 107 standards

100% polyester 300-denier ripstop shell with durable water-repellent (DWR) finish 4.6-ounce, 100% poly microfleece upper body lining 3-ounce quilted polyfill lower body lining 2-ounce quilted polyfill hood and sleeve lining Black bottom front and lower sleeves for a cleaner appearance Fabric waterproof rating: 5000MM Fully seam-sealed Adjustable rain hood Durable, reflective 2-inch tape meets ANSI 107 requirements Full-length exterior storm flap Left chest pocket Right chest pocket Two lower front pockets Center front zippered pocket to hold a tablet Mic clips at shoulders Elastic cuffs Elastic hem Port Pocket ™ for easy embroidery access This garment must be fully zipped to be in compliance with ANSI 107 standards

This lightweight CAT 2 AR/FR bomber-style jacket is lined and features 2" reflective trim to keep you warm, safe and safe in the field. Water-repellent fabric helps you stay dry, and innovative features like the elasticized waistband and deep-pleated action back increase comfort and mobility.

This lightweight CAT 2 FR/AR bomber-style jacket is lined to keep you warm and safe in the field. Water-repellent fabric helps you stay dry, innovative features like the elasticized waistband and deep-pleated action back increase comfort and mobility, utility loops on the shoulders provide convenient storage.